Becker VC420A Operations Instructions download pdf (Page 14)

Operating Instructions

Caution

• Risk of injury by electric shock.

• All electrical installations to a 230 V power network must be per-

formed by an authorised electrician.

• Before assembly, disconnect the power lead from the supply.

• When installing the system, the provisions set down by local public

utilities and the stipulations for wet and damp rooms in accordance

with VDE 100 must be observed.

• For use in dry rooms only.

• Use unmodiﬁ ed Becker original parts only.

• Keep persons away from the systems guide track.

• Keep children away from controls.

• Always comply with relevant national stipulations.

• If the system is controlled by one or more devices, the system guide

track must be visible during operation.

Becker Antriebe GmbH will be released from all warranty and product liability

obligations if the customer modiﬁ es the equipment without prior approval from

Becker Antriebe GmbH or if the equipment is installed incorrectly and/or con-

trary to these installation instructions, by the customer or a third party.

Any further processing must comply with all current statutory and ofﬁ cial regu-

lations governing manufacture and advice to customers, especially the EMC

regulations.

Warranty

Safety instructions

General

The VC420A, as delivered ex works, converts radio signals into control signals

and can be used to control a mainsconnected drive

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

No comments

Becker VC420A Operations Instructions Page 14