Becker revo.2 Operations Instructions download pdf (Page 32)

32

>>> GENERAL OPERATION

> D

> GB

> F

> I

> PL

Radio remote control

You can control most functions and the

main functions of the Navigation device

using the remote control. The remote

control operates using radio frequency

(maximum range 5 metres) and

therefore does not need to be installed in

sight of the Navigation device.

Attaching the remote control

> Take a coin and insert it into the slot in

the base plate of the remote control.

> Turn the coin anti-clockwise.

This unlocks the base plate, which can

now be removed.

> Insert the supplied battery (CR2032/

DL2032) into the battery compartment

with the positive side facing up.

> Press down the battery until it locks

into place.

> Select a suitable position to install the

remote control.

> Position the base plate so that the

word UP is pointing in the direction of

travel.

> Secure the base plate using the

supplied screws or self-adhesive film.

Note:

It is not absolutely essential for the

function of the Navigation device to

install the remote control.

Note:

Attach the remote control so that it does

not impair your ability to operate your

vehicle. The remote control must not be

attached within the deployment area of

the airbag or on an airbag cover.

Centre console

Armrest

Note:

If you wish to stick the base plate in

place, you will first need to clean the

adhesive surfaces.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 154 155

Comments to this Manuals

No comments