Becker revo.2 Operations Instructions download pdf (Page 20)

20

>>> GENERAL OPERATION

> D

> GB

> F

> I

> PL

Using the battery

The internal power supply is via the

integrated rechargeable battery. The

rechargeable battery is maintenance-

free and does not require any particular

care.

You are alerted by a warning message

when the battery should be recharged.

After the alert, the device can still be

used for approximately 10 minutes

before switching off automatically.

Connection for the cigarette lighter

Connect the power supply via the vehicle

battery and the cable provided for the

cigarette lighter as follows:

> Grasp the connector of the connection

cable and insert it gently without force

into the connector socket of the

navigation device up to the stop, or in

the case of a device with an active

cradle, on the underside of the

supporting plate.

> Insert the adapter into the cigarette

lighter.

Note:

Note that if the battery is completely

discharged, it may take up to a minute

before the device can be switched on

again.

Note:

In the event of a defective battery,

please contact your authorised dealer.

Please do not attempt to remove the

battery yourself.

Note:

If the cigarette lighter has recently been

used and is still hot, wait until the lighter

socket has cooled down.

Note:

When the engine is switched off, the

power supply slowly discharges the

vehicle battery via the cigarette lighter!

Do not therefore operate the Navigation

device for long periods with the engine

switched off.

To receive TMC messages (depending

on the model), the power supply must

be connected to the supporting plate in

the case of a device with an active

cradle.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 154 155

Comments to this Manuals

No comments